In this example we will connect a 4067 to our Chipkit UNO, at the expense of 5 I/O lines you can get 16 outputs (or inputs) The HEF4067B is a 16-channel analog multiplexer/demultiplexer with four address inputs (A0 to A3),…
Category:
Chipkit
-
-
In a previous example we connected a DHt11 sensor and outputted the results via the serial connection, this is reasonable enough for testing purposes but a more practical example would be to display this information on an LCD display for…
-
This is a simple example which shows how to connect an LDR to a Chipkit UNO. In this example we are using Mpide and will be outputting the results via the serial monitor window A photoresistor or light-dependent resistor (LDR)…
-
In this example we keep the LCD shield connected to our Chipkit UNO and this time we will connect an LDR to A4, read the value in and display it on the LCD display I used an LDR breakout but…
-
Whilst browsing some electronic sites looking at some of the development boards and kits that are available when I noticed the Chipkit UNO, this was advertised as being pin for pin compatible with arduino shields but used a Pic micro…
Older Posts