The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tiltsensing applications, as…
Another sensor reaches the desk, this time it is a Si1145 sensor, we will connect it to an Chipkit Max32 and test it out First the sensor The Si1145/46/47 is a low-power, reflectance-based, infrared proximity, ultraviolet (UV) index, and ambient…
The MMA7361L is a low power, low profile capacitive micromachined accelerometer featuring signal conditioning, a 1-pole low pass filter, temperature compensation, self test, 0g-Detect which detects linear freefall, and g-Select which allows for the selection between 2 sensitivities. Zero-g offset…
In this article we look at the TMP102 digital sensor and we will connect it up to a Chipkit MAx32 The TMP102 device is a digital temperature sensor ideal for NTC/PTC thermistor replacement where high accuracy is required. The device…
In this article we will connect a BME680 sensor to a Chipkit BME680 is an integrated environmental sensor developed specifically for mobile applications and wearables where size and low power consumption are key requirements. Expanding Bosch Sensortec’s existing family of…
In this article we will create a simple radio using a TEA5767 module and a Chipkit Max32, the example is written in the Arduino IDE The TEA5767HN is a single-chip electronically tuned FM stereo radio for low-voltage applications with fully…
In this article we look at the MMA7660 connected to a Chipkit MAx32 The MMA7660FC is a digital output I²C, very low-power, low-profile capacitive micro-machined accelerometer featuring a low pass filter, compensation for zero-g offset and gain errors and conversion…
Another ultraviolet sensor hits our test desk in this example, we will be looking at the VEML6075 this time. Lets look at the sensor first of all The VEML6075 senses UVA and UVB light and incorporates photodiode, amplifiers, and analog…
The MAX30102 is an integrated pulse oximetry and heart-rate monitor biosensor module. It includes internal LEDs, photodetectors, optical elements, and low-noise electronics with ambient light rejection. The MAX30102 provides a complete system solution to ease the design-in process for mobile…
In this example we will use a sensor to detect various colours, the sensor in question this time is a VEML6040 VEML6040 color sensor senses red, green, blue, and white light and incorporates photodiodes, amplifiers, and analog / digital circuits…
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More