PIC18F4520 push button example
In a previous example we connected a 16×2 LCD to our development board and displayed text on it, in this example we use the 2 buttons on the board to display some text on the LCD There are 2 buttons…
In a previous example we connected a 16×2 LCD to our development board and displayed text on it, in this example we use the 2 buttons on the board to display some text on the LCD There are 2 buttons…
In this example we connected an LCD to the LCD 1602 LCD connection on the Open18F4520 PIC evaluation development board from Waveshare. A simple example is to display some basic text on the LCD display. This is a picture of the…
In this example we keep the LCD shield connected to our Chipkit UNO and this time we will connect an LDR to A4, read the value in and display it on the LCD display I used an LDR breakout but…
In this example we connected an Arduino LCD shield to our Chipkit UNO and displayed some basic text. here is a typical example of this shield, its a low cost 16 x 2 LCD and is good for many projects,…
In this example we connect an LCD to our PIC16F873 microcontroller Schematic Code Mplab X using the XC8 compiler requires lcd.h lcd header file [codesyntax lang=”c”] #define _XTAL_FREQ 4000000 #define RS RC0 #define EN RC1 #define D4 RC2 #define…
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More