The LX1972 is a low cost silicon light sensor with spectral response that closely emulates the human eye. Patented circuitry produces peak spectral response at 520nm, with IR response less than ±5%, of the peak response, above 900nm. The photo …
-
-
In this example we will connect a GA1A12S202 Log-Scale Analog Light Sensor to a Chipkit Uno The features of this sensor are as follows Output voltage increases with light on the sensor Logarithmic response not only gives more sensitivity in …
-
TEMT6000 ambient light sensor is a silicon NPN epitaxial planar phototransistor in a miniature transparent 1206 package for surface mounting. It is sensitive to visible light much like the human eye and has peak sensitivity at 570 nm. Features • …
-
The ML8511 measures the amount of ultra violet rays contained in sunlight, and it is used for the equipment which displays the suntan by a ultra violet rays, the guidance for UV care of skin, etc The sensor detects 280-390nm …
-
The MLX90614 is a non-contact infrared thermometer with a measurement range from -70 to +380 degree Celsius. Just connect the four leads to your Wemos and you will have a accurate thermometer with a resolution of 0.01 and a accuracy of …
-
In this example we connect the MCP9808 to a Chipkit Uno The MCP9808 digital temperature sensor converts temperatures between -20°C and +100°C to a digital word with ±0.5°C (max.) accuracy. The MCP9808 comes with user-programmable registers that provide flexibility for …
-
SHT31 is the next generation of Sensirion’s temperature and humidity sensors. It builds on a new CMOSens® sensor chip that is at the heart of Sensirion’s new humidity and temperature platform. The SHT3x-DIS has increased intelligence, reliability and improved accuracy specifications …
-
These are interesting modules that you can buy from various online sources. They comprise of 2 4×7 7 Segment displays, 8 push buttons and 8 LEDs. The chip that performs all the magic is a TM1638. The module I bought …
-
I recently spotted a nice little compact development board for the PIC12F675, since this was a PIC that I hadn’t looked at I decided to buy one. This is the board I bought About the board External reset button. Two …
-
In this example we are using a PIC16F877 to generate a PWM signal, this particular chip has 2 Capture/Compare/PWM Peripherals The following MikroC Pro for Pic functions will be used PWMx_Init Initializes the PWM module with duty ratio 0. Parameter …